Our crate engines have been extremely popular in the MR2 world for the past few years now, so we wanted to make them even better and offer you even more for your money.
These kits included everything in our Bolt-On 2GR kit, but this also includes additional engine prep and testing to your 2GR engine here in our shop before sending you the entire package ready to drop into your car and go.
We can work with you to choose the right engine core to start from. We cover all our work and services we perform along with backing our test bench data of engines, but we do not cover any part of the engine itself under warranty unless we start with a new block.
Below are all the parts included in the kits. You can find each of these under the 2GR section of our website. These kits are made to order. We also offer a universal kit for running this in any setup (no chassis-specific parts included).
FREE FREIGHT DELIVERY to the lower 48 US!
90-day Warranty from Delivery Date!
These kits are made to order. With Special Black Friday deals, all crate engines will be built and fulfilled after the new year in priority of the orders dates placed. Contact us for details if you have specific questions!
Call or email for an ETA on your kit!
Rat2 2GR Crate Motor Kit:
- 2GR engine prepped, built, ran & tested
- See your engine run BEFORE installing it in your car!
- Powder Coated Valve Covers
- R2 Modified Water Neck
- R2 Motor mount
- R2 Custom Plug and Play Harness
- R2 Throttle Adapter
- R2 Exhaust Manifolds
- R2 Exhaust Y-Pipe (needs additional fabrication to bolt up to your exhaust)
- R2 Intake, Filter
- R2 Throttle Pedal
- R2 Tach Adapter
- R2 Hardware Kit
- R2 Inspection Cover
- R2 Stainless Steel Coolant Hardlines
- R2 PVC Kit/Vacuum System
- Walbro 255 Fuel Pump w/ kit
- Heater Lines
- Modified ECU (5-pin Camry)
- E153 Axle Carrier
- Redhorse AN Fitting Kit w/ Braided Line
- AEM Fuel Pressure Regulator
- ACT Heavy Duty Clutch Kit
- Fidanza Lightweight Flywheel
- OEM Denso Mass Air Flow Sensor
- OEM Denso O2 Sensors x2
- OEM Denso New Alternator
- R2 2GR Lift Plate
- Full Tune-Up Kit w/ Gaskets and Filters
Direct Bolt in 2GR Motor Mounts for the AW11 (E153 or S54 Available)
- Custom Axles for E153 (-$400 if you are running an S54 transmission and do not need these since you are using the matching S54 instead)
- Shift Cable Assembly for Transmission adapter
The following are services done to your 2GR engine before test running:
- Oil Pan Gasket
- Intermediate Pan Gasket
- Oil Pump O Ring
- Timing Cover Gasket
- Water Pump
- Water Pump Gasket
- VVT/Oil Squirter O-ring Seals x6
- PCV Valve
- Spark Plugs
- Splug Plug tube seal
- Valve Cover Gasket
- Rear Retainer Gaskets
- Rear Main Seal
- Exhaust Manifolds Gaskets
- Intake Manifold Gaskets
- Intake Plenum Gaskets
- Water Outlet Gaskets
- Water Inlet O-Rings
- Drain Plug O-Ring
- Stainless Hardware
- Hot tank cleaned and cleaned
- Modified for slave clearance
- Bell Housing Drilled and Tapped
*Other parts you may need to also get depending on your application. Ask us what else you may need for your build!
R134a A/C KIT +$800
We provide an optional extra AC kit for those wanting to keep their cars ice-cool in the hot summers! A new OEM AC compressor, custom plug, and play lines/hoses, and wired up and comes ready to install to your car, with an r134a conversion kit! We will install this on the engine, with a slightly different belt/routing than the standard-non AC setup.
**We require your original AC line cores to complete these. In some cases, we can source new lines, but this is also an additional cost**
Camshaft Upgrade $1995
When assembling your new 2GR, we can include a set of MRW custom camshafts and titanium valve springs. Contact for spec and details on your setup!