2GR DIY Swap Kit - Rat2
Current lead times for these kits are 5-6 weeks at a minimum. Please allow plenty of time for kit processing. Contact us for any custom setups!
For the DIY builder and people wanting to perform their own 2GR swap, we have assembled the most comprehensive kit available for the 2GR. This kit is the same as our popular crate motors, but with no engine ore engine work included. This assumes you have a pre-2012 2GRFE to start with as a core. If you have questions about what parts your engine may or may not have, please let us know and we will be happy to help you figure out what else you may need to finish the swap! Below are all the parts included in the kits.
FREE FREIGHT DELIVERY to the lower 48 US!
These kits are made to order. With Special Black Friday deals, all crate engines will be built and fulfilled after the new year in priority of the order dates placed. Contact us for details if you have specific questions!
Call or email for an ETA on your kit!
Rat2 2GR Crate Motor Kit:
- R2 Modified Water Neck
- R2 Motor mount
- R2 Custom Plug and Play Harness
- R2 Throttle Adapter
- R2 Exhaust Manifolds
- R2 Exhaust Y-Pipe (needs additional fabrication to bolt up to your exhaust)
- R2 Intake, Filter
- R2 Throttle Pedal
- R2 Tach Adapter
- R2 Hardware Kit
- R2 Inspection Cover
- R2 Stainless Steel Coolant Hardlines
- R2 PVC Kit/Vacuum System
- Walbro 255 Fuel Pump w/ kit
- Heater Lines
- Modified ECU (5-pin Camry)
- E153 Axle Carrier
- Redhorse AN Fitting Kit w/ Braided Line
- AEM Fuel Pressure Regulator
- ACT Heavy Duty Clutch Kit
- Fidanza Lightweight Flywheel
- OEM Denso Mass Air Flow Sensor
- OEM Denso O2 Sensors x2
- OEM Denso New Alternator
- R2 2GR Lift Plate
- Oil Pan Gasket (FIPG)
- VVT Hardline
- Intermediate Pan Gasket (FIPG)
- Oil Pump O Ring
- Timing Cover Gasket (FIPG)
- Water Pump
- Water Pump Gasket
- VVT O-ring Seals x6
- PCV Valve
- Spark Plugs
- Splug Plug tube seal
- Valve Cover Gasket
- Rear Retainer Gaskets
- Rear Main Seal
- Exhaust Manifolds Gaskets
- Intake Manifold Gaskets
- Intake Plenum Gaskets
- Water Outlet Gaskets
- Water Inlet O-Rings
- Drain Plug O-Ring
- Stainless Hardware
*Other parts you may need to also get depending on your application. Ask us what else you may need for your build!
