Cart 0
Fuel Line Filter to Rail - 3SGTE Gen4/5 R2

Fuel Line Filter to Rail - 3SGTE Gen4/5 R2

$ 99.95

This is a replacement hose kit for the 3SGTE Gen4/5 engine setup in the Celia or MR2. This comes with the high-pressure feed line between the fuel filter and fuel rail, the return line, and related fittings/hardware. Built from high-quality RedHorse AN fittings, reinforced braided hose, and the fuel filter adapter to bolt everything right up to the factory SW20 3S setup.  We assemble all our AN hoses here in the house with the best AN equipment and techniques, providing you with peace of mind you will have a leak-free setup.

This kit comes with the braided feed line and the 1/4 return fuel line, and a fuel filter with the two necessary adapters to convert the factory system to a 6AN setup. 

When you install it, make sure nothing is kicked or rubbing against the fuel line, and pay extra attention to all the fitting and hose connections for leaks when you first prime it. You cal always jump the Fp and B+ terminals on the diagnostics port to make the fuel pump run and pressurize the line. We recommend you do this a few times before starting the car up. 

  • RedHorse Fittings
  • Steel Reinforced Hose
  • Black Nylon Braiding for abrasion resistance strength
  • Direct fit to factory lines
  • Fuel Filter
  • M12 6AN Adapters for filter and fuel rail
  • No assembly is required - comes ready to install!


*Always check for fuel leaks under pressure BEFORE you start your car. Always check for fuel leaks at fitting joints and connections as you first drive a car. Improper installation or failure to catch a small fuel leak can lead to major car fires. PLEASE BE SAFE!

Share this Product

More from this collection